|
| |
|
|
Filter Regulator Combination with Internal Autodrain - Series FRC1A
Filter Regulator Combination with Internal Autodrain - 3/8 1/2 SIZES
Features
| Modular Type |
|
| Suitable for panel mounting |
Filter - Bronze Filtering element.
- Separator and shield for efficient moisture separation
- Press type manual drain for easy opreation. |
Internal
Autodrain - Float type, no electrical connections required.
- Provided with manual drain.
- Provision for drain tube connection, to take the condensate away from the unit, to keep the working area clean. |
Regulator - Diaphragam opreated , relieving type.
- Pressure Componsated by Balanced poppet.
- Flow componsated.
- Non raising 'Press to lock' adjusting knob for
locking at any set pressure. |
| Bayonet type steel bowl guard. |
| Good fllow and regulating characteristics. |
| |
|
|
| Technical Specification |
|
FRC14....A |
FRC...15A |
| Medium |
Compressed Air |
| Port Size |
G3/8 |
G1/2 |
| Pressure gauge port size |
G1/8 |
G1/8 |
| Flow rate Its / min @ |
1800 |
3000 |
| Opreating pressure |
2-10 bar |
| Regulating Pressure Range# |
0.2-2bar, 0.2-4bar, 0.5-0.7bar, 0.5-10bar(standard) |
| Ambient/Medium Tempreature |
5°-50°C |
| Filteration# |
5µ,25µm, 40 µm (standard), 50 µm, 100µm |
Bowl Capacity
(at maximum condensate level) |
35 |
65 |
| Bowl Material |
Polycarbonate |
| Installation |
Vertical (as shown in the picture) |
| Materials of construction |
Aluminium, Bronze, Steel, Acetal, Polycarbonate, SS, Nitrile |
| Weight |
0.74 |
1.50 |
| Optional Accessories* |
Clamp, Modular Mounting kit |
|
| |
@ Supply pressure 6 bar, pressure drop  = 0.5 bar (for standard models.) |
| # For Details see "How to order" |
| |
* For Details refer Optional accessories Cat No APA-01. |
| Precautions |
- Note the direction of flow before installation and connect piping accordingly.
- Flush pipings for dirt, dust, rust and other foreign particles.
- Install in clean atmosphere.
- Nipples with taper threads (R) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening.
Nipples with straight threads (G) to be used with sealing washer.
- Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner,solvents, trichlorethylene
kerosene or other aromatic hydrocarbons
|
| |
| Pressure Setting: |
Pull the knob and adjust by turning the knob clockwise to increase the pressure.Push the knob back to its locked position.
(Turning the knob counter clockwise will reduce the pressure) |
|
|
|
Home
