|
| |
FILTER REGULATOR COMBINATION SERIES FRC1 |
|
|
|
Filter Regulator Combination 1/4 3/8 1/2
Features
| Modular Type |
|
| Suitable for Modular mounting |
Filter - Bronze Filtering element.
-Separator and shield for efficient moisture separation
- Press type manual drain for easy opreation. |
Regulator - Diaphragam opreated , relieving type.
- Pressure Componsated by Balanced poppet.
- Flow componsated in models FRC14 and FRC15 for faster response. |
| Steel bowl guard, bayonet type onFRC14 & FRC15 models and threaded type on FRC13 model |
| Good fllow and regulating characteristics. |
| |
|
|
| Technical Specification |
Model |
FRC13 |
FRC14 |
FRC15 |
| Medium |
Compressed Air |
| Port Size |
G1/4 |
G3/8 |
G1/2 |
| Pressure gauge port size |
G1/8 |
G1/8 |
G1/8 |
| Flow rate Its / min @ |
550 |
1800 |
3000 |
| Max supply pressure |
10 bar |
| Regulating Pressure Range# |
0.2-2bar, 0.2-4bar, 0.5-7bar, 0.5-10bar (standard) |
| Ambient/Medium Tempreature |
5°-60°C |
| Filteration# |
5µ,25µm, 40 µm (standard), 50 µm, 100µm |
Bowl Capacity
(at maximum condensate level) |
9ml |
32ml |
44ml |
| Bowl Material |
Polycarbonate |
| Installation |
Vertical (as shown in the picture) |
| Materials |
Aluminium, Bronze, Steel, Acetal, Polycarbonate, SS, Nitrile |
| Weight |
0.30Kg |
0.58Kg |
1.27Kg |
| Optional Accessories* |
Clamp, Modular Mounting kit |
|
| |
@ Supply pressure 6 bar, pressure drop  = 0.5 bar (for standard models.) |
| # For Details see "How to order" |
| |
* For Details refer Optional accessories Cat No APA-01. |
| Precautions |
- Note the direction of flow before installation and connect piping accordingly.
- Flush pipings for dirt, dust, rust and other foreign particles.
- Install in clean atmosphere.
- Nipples with taper threads (R) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening.
Nipples with straight threads (G) to be used with sealing washer.
- Polycarbonate bowls may get damaged and possibly fail exposed to synthtic oils, thinner, solvents, trichlorothylene, kerosene or other atomotic hydrocarbons.
|
| |
| Pressure Setting: |
Pull the knob and adjust by turning the knob clockwise to increase the pressure.Push the knob back to its locked position.
(Turning the knob counter clockwise will reduce the pressure) |
| |
| Fliter Regulator Combination Series FRC1 |
|
Model |
W |
V |
A |
B |
E |
K |
F |
GØ |
J |
L |
T |
H2 |
FRC 13 |
G 1/4 |
G 1/8 |
4 0° |
1 7 0 |
6 8 |
4 5 |
3 0 |
2 8 |
2 8 |
5.5 |
2 |
5 0 |
FRC 14 |
G 3/8 |
G 1/8 |
5 5° |
2 2 0 |
9 5 |
5 3 |
4 0 |
4 0 |
4 0 |
6.5 |
2 |
5 5 |
FRC 15 |
G 1/2 |
G 1/8 |
7 0° |
2 8 0 |
1 2 5 |
6 2 |
5 0 |
5 1 |
5 5 |
8.5 |
2 |
8 0 |
|
| |
|
| |
| How to order: |
| FRC1 |
|
|
|
Body & Port Size |
Filteration µm |
Pressure Range |
3 6 1 -- G 1/4 |
1 -- 5 µm |
1 --- 0.2 - 2 bar |
4 6 2 -- G 3/8 |
2 -- 25 µm |
2 --- 0.2 - 4 bar |
5 6 3 -- G 1/2 |
3 -- 40 µm (standard) |
3 --- 0.5 - 7 bar |
| 4 -- 50 µm |
4 --- 0.5 - 10 bar (standard) |
| 5 -- 100 µm |
|
|
| Ordering Example: |
| Filter Regulator Combination - 3/8 size (with G 3/8 port) with 5µm Filter and pressure range 0.5-7 bar Ordering No:FRC146213. If ordered as FRC 3/8 our standard model FRC 146234, with 40µm Filter and Pressure range 0.5-10 bar will be supplied. |
| |
|
Home
