|
|
|
Lubricator Series L1
Lubricator 1/4 3/8 1/2
Features
| Conforms to ISO 6301-1 |
|
| Suitable for Modular mounting |
| Fog/Mist type |
| Fine adjustment of lubrication |
| Steel bowl guard, bayonet type on L14 & L15 models and threaded type on L13 model |
| Lubrication propotional to flow |
| |
|
| |
| Technical Specification |
Model |
L13 |
L14 |
L15 |
| Medium |
Compressed Air |
| Port Size |
G1/4 |
G3/8 |
G1/2 |
| Flow rate its/min @ |
1350 |
3000 |
5650 |
| Max supply pressure |
10 bar
|
| Ambinent / Medium tempreature |
5° - 60°C |
| Min opreating flow its/min |
12 |
40 |
45 |
Bowl Capacity
(at maximum condensate level) |
20ml |
57ml |
152ml |
| Recommended oil |
ISO VG 32 (Servo System 32) |
| Blow Material |
Polycarbonate |
| Installation |
Vertical (as in the picture) |
| Materials of construction |
Aluminium, Bronze, Steel, Acetal, Polycarbonate, SS, Nitrile |
| Weight |
0.185Kg |
0.30Kg |
0.56Kg |
| Optional Accessories* |
Clamp, Modular Mounting kit |
|
| |
@ Supply pressure 6 bar, pressure drop  = 0.5 bar (for standard models.) |
| |
* For Details refer Optional accessories Cat No APA-01. |
| Precautions |
- Note the direction of flow before installation and connect piping accordingly.
- Flush pipings for dirt, dust, rust and other foreign particles.
- Install in clean atmosphere.
- Nipples with taper threads (R) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening.
Nipples with straight threads (G) to be used with sealing washer.
- Polycarbonate bowls may get damaged and possibly fail exposed to synthtic oils, thinner, solvents, trichlorothylene, kerosene or other atomotic hydrocarbons.
- Oil may be filled when under pressure. However it is recommended to vent the air completely before filling the oil.
|
| |
|
| |
Model |
W |
A |
B |
E |
K |
F |
J |
L |
T |
H2 |
L 13 |
G 1/4 |
4 0° |
1 3 5 |
4 2 |
1 5 |
3 0 |
2 8 |
5.5 |
2 |
35 |
L 14 |
G 3/8 |
5 5° |
1 5 7 |
4 4 |
2 5 |
4 0 |
4 0 |
6.5 |
2 |
45 |
L 15 |
G 1/2 |
7 0° |
1 9 0 |
4 6 |
2 5 |
5 0 |
5 0 |
8.5 |
2 |
45 |
|
| |
|
| |
| How To Order: |
| L1 |
|
Principle of Opreation |
Body & Port size |
A part of the air entering the Lubricator through "IN" pressurises the bowl chamber.
Flow of full air goes through "OUT" deflecting the "Deflector" and creating
pressure drop below the site dome.
The pressure in the Bowl
presses the oil through the suction tube and the oil flows through the sight dome. All the oil drops seen through the sight dome mixes with the main-sream air and comes through "OUT". The required oil drops can be adjusted needle.
|
3 6 1 - G 1/4 |
4 6 2 - G 3/8 |
5 6 3 - G 1/2 |
|
Ordering Example:
Lubricator - 3/8 port size (with G 3/8 port): Ordering No: L1462 |
| |
|
|
Home
