Home
 About Us
 Sovereign
   Pneumatic
Textile Machinery Spares
 Chains
 Belts
 Autoconer
 Sujatha Electronics
   Sprecher+schuh
   Electricals & Electronics
 Contact
 Feedback
 

 

 


 

SOFT START VALVE

 

 
 

Soft Start Valve G1/2


Features

 Solenoid opreated with manual override.
 Soft start and dump function.
 Adjustable needle to vary the time of build up of  downstream pressure.
 Suitable for modular construction. (FRL's)
 (Body ported for pipe moutning)
 Low Opreating Pressure
 Coil can be rotated by 360°.
 Elegant design and finish.


Function:

  • These valves are used in conjuction with air preparation units (FRL's).
  • When a signal is applied to the valve, air pressure in the downstram side builds up gradually through an adjustable needle, until the
    downstream pressure reaches 50-80% of the inlet pressure, after which the valve opens fully. when the valve is deenergised, the downstream pressure is dumped to the atmosphere. (a silencer may be provided in the exhaust port to dampen the dumping noise.)

Application:

These valves are used as a a safety device to prevent the risk of sudden impact of air, on valves / cylinders / pneumatic components thus reducing the risk of accidents caused during start up.


Technical Specification

  Model      
  Portsize      
  Medium  
  Opreating pressure (bar)  
  Ambient Tempreature  
  Flow rate Lts/min@
1->2
2->3
3600
3000
  Materials of construction
Aluminium, Brass, Acetal, Stainless steel, Nitrile
  Weight Kg
0.70
  Electrical
  Voltage (V)±10%
AC (50Hz)
24,48,110,220
DC
12,24,48,110
  Power Consumption
6.5VA
5 Watts
  Duty Cycle
Continous
  Class of insulation
Class F
  Type of coil protection
IP65

*with Ø 12 Id Tubing
@inlet pressure 6 bar, pressure drop p=1bar.
Precaution:

Lubricator should be mounted on the downstream side might create oil back flow.

Note:
Turning the adjustable needle clockwise, increases the time delay for full pressure and viceversa.
How to Order
The ordering no.for soft start valve with various coil voltages.
Coil Voltage
Valve ordering number
220 V AC S01163- A
110 V AC S01163- B
48   V AC S01163- D
24   V AC S01163- G
110  V AC S01163- Q
48    V AC   S01163- S
24    V DC S01163- W
12    V DC S01163- R